A Comprehensive Guide To Find The Best Coverstitch Machines

If you think you only need a good sewing machine and sometimes a serger to have the best project every time you sew, I am here to prove the opposite.

A sewing machine can help you with most basic projects, but when it comes to some special materials, like knit fabric, for example, things can go off course easily.

Keep reading to find out why. If you are interested in buying a coverstitch machine, here is where I found my best coverstitch machine here https://craftsselection.com/best-coverstitch-machine-reviews/.

Why a coverstitch machine?

I assume that you know about the trend of using knit fabric in the last few years. I do follow that trend and have gained some hands-on experience in dealing with this type of fabric.

Most sewists who have to handle knit fabric often purchase a serger. I own one myself and the result it brings is wonderful. The seams I make are neat and tidy without taking up a lot of my time.

However, there is one thing my serger cannot do. That is to hem my projects. I have tried using twin needles, it did not work out well. That was when I decided to buy a coverstitch machine.

My coverstitch is able to use up to three needles and a looper according to my needs. The number of needles I use is at the same time, the number of stitch lines on the right side of the project.

For example, with one needle and the looper, the project will have one chain stitch on the right side and one on the wrong side.

If I use three needles, three lines appear on the right side and a complicated pattern on the other side.

I rarely use all three needles at once. My favorite arrangement is to take out one needle, either the one on the left or the one on the right, to create a T-shirt hem stitch. Sometimes I remove the one in the middle if I want my parallel stitch lines to be a little farther from each other.

If you plan to do the same, bear in mind that the needle that you are not using should be removed.

At this point, you might be thinking that you have a hybrid machine that can be either a coverstitch or a serger. However, if you are serious about knit fabrics, I recommend buying these machines separately.

If you haven’t had a good entry level sewing machine and are having an eye for a computerized one, check out website at CraftsSelection.com to read more reviews. Using the best sewing machine for beginners will help you sew with ease and avoid frustrating issues.

While the convenience of such machine is undeniable, you may find that switching between the two functions is way more cumbersome than moving from one machine to the other. Plus, when a serger and a coverstitch are combined, both of them cannot work as well as usual.

What else can you use a coverstitch machine for?

Flat hem

From the leading edge of the project, check if the two needles are penetrating both layers of the project. Start the machine and work as usual. Stop when you land at the desired place. Lift the presser foot as high as possible. Pull the thread towards you by any object you feel convenient.

Cut the needle threads.

Push the project to the direction opposite you and cut the last thread. For extra security, you can knot the threads.


At some point of your sewing, you will have to do hemming in the round. As with flat hem, start by making sure the needles are penetrating both layers of the project.

When you have made a full circle and come back to the beginning, make a few more stitches overlapping the first where you began.

Do the rest as with flat hem.


You will make mistakes on your project and have to unpick what you have just made. You would be surprised to know that unpicking a coverstitch seams is easier than any other machines.

Once I know how to do this with my coverstitch machine, even my best computerized sewing machine for beginners that I am so proud of, cannot beat it. As coverstitch machine’s seams can be unraveled easily, it is advisable to secure the threads once you have done with them.

To unravel the project, cut off the knot and undo a few stitches by a pin or a seam ripper. Then hold the needle thread with one hand and the looper thread with the other, pull the two to opposite directions. The seams will unravel easily.

Buying guide

I bet you still remember the fuss of buying your best first sewing machine. All the reviews and price comparisons are overwhelming.

Cover stitch machines don’t come at as wide a variety as sergers or sewing machines, but there are a few things to remember:

The number of threads: As I said before, coverstitch machines can have up to three needles and a looper. However, if you only need two needles, save yourself some money by purchasing a three thread (two needles and a looper).

Threading: A typical coverstitch machine is easier to thread than a sewing machine and a serger. However, if you want to save time on this task or for some reason, unable to do it, there are some models that have auto threading.

Tension: You will find on your machine a level or a dial to adjust thread tension. If you need further assistance on this, some machines have a mechanism to allow you more control.

A free arm: you may not think about it often but a free arm will come in handy with hemming the round. Unless you are sure you only need to do the flat hem, choose a machine with this feature.

Adjustable pressure foot: This allows you full control over how close or far the pressure foot is to the machine bed.

Differential Feed: This allows you to adjust the feed dog to make sure the stretchy fabric doesn’t result in a wavy project.

If you are still on the look for the best coverstitch sewing machine, check my recommendation at CraftsSelection Top Product Reviews for more comprehensive reviews.